Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 318

Deluxe Telephone Programming
1. Access the Database Item Selection Screen using the procedures in Section
3.2.
2. Enter 01- Extension No. -21 and press the softkey beneath save . This
advances to the PORT TYPE programming screen.
3. Press the softkey beneath chg until the port type VM displays for this
extension.
4. Press the Volume button (
Screen.
5. Enter 06-01-01-24-03-01 ( MEMBER where 01‐24 is the group
number.) and press the softkey beneath save . This advances to Member
#1 of the UCD Group selected.
6. Press the softkey beneath chg to enter the extension directory of the
analog port to program into this Member.
7. Press the softkey beneath save .
8. Press the softkey beneath next .
9. Repeat steps 2 through 8 to program all voicemail ports as member of this
UCD Group.
10. Press the Volume button (
Screen .
11. Enter 06-02- Tenant Group -01 and press the softkey beneath save .
This advances to the VM HUNT GROUP programming screen for Tenant
(1) – Hunt Group.
12. Press the softkey beneath chg until the UCD Group to be used as the VM
HUNT GROUP displays. (UCD Group where all of the VM type analog
ports are programmed as Members.)
17. Press the softkey beneath next to continue programming the various call
handling digits (Prefix/Suffix).
18. Press the Volume button (
Screen.
19. Enter 06-02- 1‐3 -02-01 and press the softkey beneath save . This
advances to the PREFIX TABLE – ICM/VM , programming screen for the
selected tenant group.
20. Press the softkey beneath chg to enter the required digits to identify this
call as originated at the subscriber phone.
21. Press the softkey beneath save .
v
) to return to the DB Item Selection
v
) to return to the DB Item Selection
v
) to return to the DB Item Selection
Emerald ICE Installation, Programming & Maintenance Manual
10-11