Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 314

RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Extension Application, Uniform Call
Distribution to display the following:
3. Using the drop‐down list in the Hunt Group: field, select a UCD/Hunt
Group to program. Available selections are 1‐24.
4. Usging the drop‐down list in the Attribute: field, select an attribute.
Available selections are VA (Voice Announce) and UCD.
5. Using the drop‐down list in the Tenant Group: field, select a Tenant Group
which will be associated with this UCD/Hunt Group. Available selections
are 1‐3.
6. Enter a name of up to 7 characters to identify the UCD/Hunt Group in the
Name field.
7. Click on the Members: button to display the following:
Emerald ICE Installation, Programming & Maintenance Manual
10-7