Single Line Telephone - Co Line Flash - Tadiran Telecom Emerald ICE Installation & Maintenance Manual

Single Line Telephone – CO Line Flash
13.60
Feature Code: PGM
Description
Reference the feature: Flash – CO Line. When a Single Line Telephone must
generate a Flash command to the
and Centrex features of CO Lines) the SLT – CO Line Flash
®
Default Settings:
N/A
Operation
Sending a Flash to a Connected CO Line from an SLT:
1. While connected on a CO Line and conversation, operate the single‐line
telephone hook‐switch flash.
2. Dial the code
command to the connected CO Line.
3. Dial whatever code is required to complete the hook‐flash initiated
PBX/Centrex® feature.
Operational Notes
•
The successful operation of the connected device features (PBX/Centrex
upon proper
vided with the connected equipment for more information.
p3
connected CO Line (typically applicable to PBX circuits
p3
PGM
. The Emerald ICE sends the hook‐switch flash
operation of that product's features. Refer to the information pro‐
Emerald ICE Installation, Programming & Maintenance Manual
command must be used.
) is dependant
®
13-81