Pause / Pause Insertion - Tadiran Telecom Emerald ICE Installation & Maintenance Manual

7.21
7-64
Emerald ICE Installation, Programming & Maintenance Manual

Pause / Pause Insertion

Pause Insertion is used to generate an intentional delay in dialing on outgoing CO
line calls. A pause or a combination of pauses may be stored in the Speed Dial
bins to allow timed access to special services, while allowing you to monitor the
progress of the call.
A pause will appear as P on a Deluxe Telephone display.
The system also supports Automatic Pause Insertion. This function monitors digits
dialed on "PBX" Type CO Lines for PBX Codes entered. When a PBX Code is
recognized, the system automatically inserts a pause between that digit and the
remaining digits for Last Number Redial system features.
An SLT Hook‐Switch Flash is a compensation timer that allows the programmer to
adjust signaling characteristics of SLT users such that they are properly deciphered
by the Emerald ICE system. Entries are in milliseconds.
Hook‐switch operation Result
< ʺSTARTʺ time Ignored
<ʺSTARTʺ and <ʺENDʺ Hook‐switch Flash signal on port (feature
>ʺENDʺ time
A PBX Auto Pause is when a PBX Line port is connected to an ICE Trunk port,
specific digit(s) (e.g.. ʺ9ʺ) are required to access a PBX Trunk. The ICE system will
automatically insert a pause between the these digit(s) when redial features are
invoked.
operation)
Disconnect current connection