The Emerald ICE is shipped as follows:
•
1‐KSU with the following:
‐Ten (10) digital extension ports.
‐Two (2) analog device ports.
‐Six (6) CID‐ready CO Line ports.
‐Two music source enters (can be assigned as desired to CO lines for hold
music/messages.
‐One power failure port (CO Line 1).
‐One control contact (LBC, Gate, External Page Control).
‐One external paging equipment interface.
‐Two serial ports.
‐PC‐RMP Programming Interface.
‐SMDR (Station Message Detailed Recording).
Emerald ICE Installation, Programming & Maintenance Manual
1-3
Need help?
Do you have a question about the Emerald ICE and is the answer not in the manual?
Questions and answers