Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 291

8-30
Emerald ICE Installation, Programming & Maintenance Manual
Default Settings:
RMP Connection – Auto Log Off = 20 minutes. (Range is 10/20...60.)
RMP Connection – Log On Again = 30 minutes. (Range is 0/10...60.)
Built‐in Modem – DIR No. is set to 400. (Range is any extension number.)
Built‐in Modem – Baud Rate is set to 2400. (Range is 1200/2400.)
Deluxe Telephone Programming
1. Access the Database Item Selection Screen using the procedures in Section
3.2.
Program Auto Log‐Off and/or Log‐On Again timers:
2. Enter 08-04 , then press the softkey beneath save . This advances to the
AUTO LOG-OFF programming screen.
3. Press the softkey beneath chg to change the AUTO LOG-OFF timer until
the desired time displays. When the programmer has forgotten to exit the
database programming mode (exit programming) AUTO LOG-OFF will
perform this function automatically. Available selections are 10 , 20 , ... 60 .
4. Press the softkey beneath next to advance to the LOG-ON AGAIN
screen.
5. Press the softkey beneath chg to change the LOG-ON AGAIN timer until
the desired time displays. This security data item prohibits access to
database administration (programming) when there have been three
unsuccessful attempts to enter database programming. When the wrong
password is entered three times, this is the amount of time that will lapse
before the Emerald ICE system will allow successful access. An entry of 0
disables this function. Available selections are 0 , 10 , 20 , ... 60 .
Program settings for the built‐in modem:
6. Enter 04-13 , then press the softkey beneath save . This advances to the
BUILT_IN MODEM programming screen.
7. Press the softkey beneath show . This advances to the DIRECTORY #
screen. To change to the built‐in modem directory number, press the
softkey beneath chg .
8. Enter the appropriate directory number (must be a valid extension
directory number as allocated in System Application – Numbering Plan –
Extension Directory Numbers).
9. Press the softkey beneath next to advance to the modem BAUD RATE
screen.