13.43
13-60
Emerald ICE Installation, Programming & Maintenance Manual
Receiving a Call in Tone Mode
1. When your extension is idle, you will be alerted of an intercom call by a
double‐burst tone which is repeated until you respond or until the call
follows a Call Forward route.
2. You can:
a. Lift the handset for privacy.
S
b. Press the
caller using the speakerphone.
Operational Notes
•
During Tone Ring, the red LED associated with the
If a Feature/DSS Button has been programmed with the Intercom Mode
!
PGM
Selection Code (
the current mode selection as follows:
•Voice Announce – Hands‐free, LED will light steady green.
•Voice Announce – Privacy, LED will light steady red.
•Tone Ring Mode ‐ LED will not light
Last Number Redial
p8
Feature Code:
PGM
Description
The Last Number Redial feature, or LNR, automatically dials the last number dialed
from your telephone. The LNR retains up to sixteen (16) digits. You may either
choose a specific outside line by first pressing that outside line button or you can
allow the line to be selected automatically by the LNR feature.
Default Settings:
N/A
button to activate the speakerphone and speak with the
P98
) the LED associated to that button will indicate
S
button will flash.
Need help?
Do you have a question about the Emerald ICE and is the answer not in the manual?
Questions and answers