Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 415

13-50
Emerald ICE Installation, Programming & Maintenance Manual
Use the Headset to Answer a Call
1. While the telephone is ringing, press
indicate that the headset is active. The ringing call is answered and
connected to the headset.
S
2. Press again to disconnect the current call.
Operational Notes
• You can assign a Feature/DSS Button with the Headset feature code and use
the button to turn the headset on and off. When the headset is enabled that
button will light.
• While using the headset, you can pick up Intercom Voice calls by pressing
S
the button.
• Incoming CO line calls can be answered by pressing the
pressing the specific CO line button.
• Features like background music and muted ring continue to operate in the
same manner while you are on‐hook.
• Non‐amplified headsets can be powered directly from the key telephone. In
most cases this interface permits the key telephone to control the
Mute features. Some headsets can require the use of the headset adapter
keys to adjust the volume, mute and other headset functions.
S
• Pressing the
S
button will disconnect calls when Headset Mode is active.
S
. The button LED flashes to
S
button or by
v
and