Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 252

5. Press the softkey beneath next to advance to pulse dialing INTER_DGT
TIME . This is the system timing, in milliseconds of the time between digit
dialing signals. (Dial Pulse and DTMF modes use this timer) Press the
softkey beneath chg to select the INTER_DGT TIME .
6. Press the softkey beneath next to advance to TONE TIME .
7. Press the softkey beneath chg to select the appropriate TONE TIME (this
time is also used for DTMF inter‐digit timing). This is the system timing, in
milliseconds of duration of Tone (DTMF) signal generated by the system
for each DTMF digit.
8. Press the Volume button (
Screen or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Call Handling, Timing to display the RP: Call
Handling ‐Timing (Part 1) window. Press the More button to display
following:
v
) to return to the DB Item Selection
Emerald ICE Installation, Programming & Maintenance Manual
7-71