Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 227

7-46
Emerald ICE Installation, Programming & Maintenance Manual
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, Call Handling, Dialing from the menu bar. When the RP: Call
Handling‐Dialing (Part 1) window appears, click on the More button to
display the following window.
3. Using the drop‐down list in the Tone Time: field, select the tone length, in
microseconds. This timer is relevant only for analog interface voice
processing systems connected to the Emerald ICE analog ports. It is the
minimum duration of DTMF tones delivered to the voicemail analog port
for voice processor call processing. Available selections are 60, 90, 120, and
150.
4. Using the drop‐down list in the Inter‐Digit Tone: field, enter the time
between tones, in microseconds. This timer is relevant only for analog
interface voice processing systems connected to the Emerald ICE analog
ports. It is the minimum duration of time between DTMF tones deliverd to
the voicemail analog port for voice processor call processing. Available
selections are 60, 90, 120, and 150.
5. Continue other programming or click on the Close button to close the
window without making changes or click on the Update button and follow
the prompts to save the database changes.