Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 322

77. Press the softkey beneath next to continue programming the various call
handling digits (Prefix/Suffix).
78. Press the Volume button (
Screen.
79. Enter 03-33-01 and press the softkey beneath save. This advances to the
VM DIALING RATIO – TONE TIME programming screen.
80. Press the softkey beneath chg until the appropriate Tone Time displays.
This timer is relevant only for analog interface voice processing systems
connected to Emerald ICE system analog ports. The Tone Time is the
minimum duration of DTMF tone delivered to the voicemail analog port
for voice processor ‐ call processing. Available selections are 60 , 90 , 120 ,
150 milliseconds.
81. Press the softkey beneath next to program Inter‐Digit Time.
82. Press the softkey beneath chg until the appropriate Inter‐Digit Time
displays. This timer is relevant only for analog interface voice processing
systems connected to Emerald ICE system analog ports. The INT_DGT
TIME is the minimum duration of time between DTMF tones delivered to
the voicemail analog port for voice processor ‐ call processing. Available
selections are 60 , 90 , 120 , 150 milliseconds.
83. Press the Volume button (
Screen or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
v
) to return to the DB Item Selection
v
) to return to the DB Item Selection
Emerald ICE Installation, Programming & Maintenance Manual
10-15