Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 302

11. Press the softkey beneath chg until the appropriate COS displays for this
Account Code PSWD .
12. Press the softkey beneath next and DISABLED is displayed. This setting
is used temporarily disable the use of a particular Account Code without
removing its programming. DISABLED means that this account code is
active.
13. Toggle the softkey beneath chg to select Y or N to disable this Account
Code password.
14. Press the softkey beneath next to continue programming other account
codes or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Toll Restriction, Account Code Table to display
the following:
Display Area
Programming Area
3. Using the drop‐down list in the Length: field, select an appropriate account
code Length. The Account Code Length can be from 2 to 8 digits.
4. Click on an ID Number in the No. field. The programmed information for
that Account Code will be displayed below and can be edited. If
programming Account Code information for an ID Number with no
previous information displayed in the Display Area, the fields in the the
Programming Area will be empty.
Emerald ICE Installation, Programming & Maintenance Manual
9-3