Setting The Timing Detection Mode; Setting The Input Searching Method - Christie Inspire Series User Manual

PIP/PBP Layout
PIP, Sub Top Left
PIP, Sub Top Right

Setting the timing detection mode

Set timing detection mode to enhanced or normal to support additional PC timings. When the
projected picture is not completed, this function is used to adjust the picture.
1. Select Menu > Input Switching & PIP > Auto Image Resync.
2. Select the appropriate mode:
• Normal—If the input signal source has been plugged to the same port on the projector
and not been replugged, then the projector can process the signal at a faster speed.
• Enhanced—Every time the projector receives the signal, it will analyze the source signal
profoundly and verify the integrity. This ensures the optimal image quality but consumes
more time.
3. To confirm the selection, press ENTER.

Setting the input searching method

Set the most suited method for searching input source.
1. Select Menu > Input Switching & PIP > Input key.
2. Select the appropriate searching method:
• Change Sources—Change the source manually by pressing INPUT on the keypad or
remote control.
• List all Sources—Select to list all the sources and then select the input source you want.
• Auto Sources—Automatically search the source.
3. To confirm the selection, press ENTER.
Inspire Series User Manual
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
PIP/PBP Size
Small Medium
P P
P P
Configuring input settings
Large
P
P
60