Searching An Input Signal; Selecting An Aspect Ratio - Christie LX400 Manual

Operating
Selecting an input signal (continued)
Press the VIDEO button on the remote control to select an
1.
input for video signal.
Each time you press the button, the projector switches its
video input port as below.
COMPONENT (Y, C
● If the VIDEO button is pushed (when switching from RGB to VIDEO signals)
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu
the projector will check the COMPONENT (Y, C
is detected at the port, the projector will check other ports in above order.
17 (*))
(

Searching an input signal

Press the SEARCH button on the remote control.
1.
The projector will start to check its input ports in order to
find any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
RGB 1 RGB 2

Selecting an aspect ratio

Press the ASPECT button on the remote control.
1.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
For an RGB signal
NORMAL
For an HDMI signal
NORMAL
For a video signal, s-video signal or component video signal
4:3 16:9
For no signal
4:3 (fixed)
● The NORMAL mode keeps the original aspect ratio of the signal.
LX400 User Manual - Operating Guide
/P , C /P )
B B R R
HDMI COMPONENT (Y, C
4:3 16:9 SMALL
4:3 16:9 14:9
14:9 SMALL
S-VIDEO VIDEO
/P
B
/P , C
B B R
SMALL
18
STANDBY/ON
, C /P ) port first. If no input
B R R
MAGNIFY
ON
OFF
FREEZE
/P ) S-VIDEO
R
ASPECT
020-000169-03 Rev. 1 (11-2010)
LASER
INDICATOR
VIDEO RGB
MY BUTTON VOLUME
1
MUTE
2
KEYSTONE SEARCH
VIDEO