Setting The Timing Detection Mode; Setting The Input Searching Method - Christie HS Series User Manual

PIP/PBP Layout
PIP, Bottom Left
PIP, Top Left
PIP, Top Right

Setting the timing detection mode

Set timing detection mode to wide or normal to support additional PC timings. When the projected
picture is not completed, this function is used to adjust the picture.
1. Select Menu > Input Switching & PIP > Auto Image.
2. Select the appropriate mode:
• Normal mode—Supports 4:3 input sources.
• Wide mode—Supports the 16:9 input source and most 4:3 input sources.
For 4:3 input sources not recognized by Wide mode (for example 1400 x 1050), perform
Auto Image using Normal mode.
3. To confirm the selection, press ENTER.

Setting the input searching method

Set the most suited method for searching input source.
1. Select Menu > Input Switching & PIP > Input key.
2. Select the appropriate searching method:
• Change Sources—Change the source manually by pressing INPUT.
• List all Sources—Select to list all the sources and then select the input source you want.
• Auto Sources—Automatically search the source.
3. To confirm the selection, press ENTER.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
PIP/PBP Size
Small Medium
P P
P P
P P
Configuring input settings
Large
P
P
P
59