Setting The Timing Detection Mode; Setting The Input Searching Method - Christie GS 2K Series User Manual

PIP/PBP Layout
PBP, Main Right
PBP, Main Bottom
PIP, Sub Bottom Right
PIP, Sub Bottom Left
PIP, Sub Top Left
PIP, Sub Top Right

Setting the timing detection mode

Set timing detection mode to enhanced or normal to support additional PC timings. When the
projected picture is not completed, this function is used to adjust the picture.
1. Select Menu > Input Switching & PIP > Auto Image Resync.
2. Select the appropriate mode:
• Normal—If the input signal source has been plugged to the same port on the projector
and not been replugged, the projector can process the signal at a faster speed.
• Enhanced—Every time the projector receives the signal, it analyzes the source signal
and verifies the integrity of it. This ensures the optimal image quality but consumes more
time.
3. To confirm the selection, press ENTER.

Setting the input searching method

Set the most suited method for searching input source.
1. Select Menu > Input Switching & PIP > Input key.
2. Select the appropriate searching method:
• Change Sources—Changes the source manually by pressing INPUT on the keypad or
remote control.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
PIP/PBP Size
Small Medium
P P
P
P
P P
P P
P P
P P
Configuring input settings
Large
*
P
*
P
P
P
P
P
67