NEC Univerge SV8100 Features And Specifications Manual page 719

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
(1) Terminal Type (B1)
10-03-06 ETU Setup (DLCA PKG Setup) –
Terminal Type (B2)
General Purpose Relay
Description/Comments
Set up and confirm the Basic
Configuration data for terminal
type (B1).
When using a PGD-U10 for
general purpose relay functionality
the digital port must be set to one
of the valid PGD settings.
Set up and confirm the Basic
Configuration data for terminal
type (B2).
When using a PGD-U10 for
general purpose relay functionality
the digital port must be set to one
of the valid PGD settings.
Assigned Data
1
0 = Not Set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)

7 = PGD (Tone Ringer)
8 = PGD (Door Box)
9 = PGD (ACI)
10 = DSS Console
11 = --Not Used--
(default = 0)
0 = Not Set
6 = PGD(2)-U10 ADP
(Paging)
7 = PGD(2)-U10 ADP
(Tone Ringer)

8 = PGD(2)-U10 ADP
(Door Box)
9 = PGD(2)-U10 ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
Issue 12.0
Level
2 3
2 - 689