NEC Univerge SV8100 Features And Specifications Manual page 690

Issue 12.0
Program
Program Name
Number
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
11-11-09 Service Code Setup (for Setup/
Entry Operation) – Answer
Message Waiting
11-11-10 Service Code Setup (for Setup/
Entry Operation) – Cancel All
Messages Waiting
11-11-11 Service Code Setup (for Setup/
Entry Operation) – Cancel
Message Waiting
11-11-12 Service Code Setup (for Setup/
Entry Operation) – Alarm Clock
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
11-11-14 Service Code Setup (for Setup/
Entry Operation) – Text Message
Setting
11-11-15 Service Code Setup (for Setup/
Entry Operation) – Enable
Handsfree Incoming Intercom
Calls
11-11-16 Service Code Setup (for Setup/
Entry Operation) – Force Ringing
of Incoming Intercom Calls
11-11-17 Service Code Setup (for Setup/
Entry Operation) –
Programmable Function Key
Programming (2-Digit Service
Codes)
11-11-18 Service Code Setup (for Setup/
Entry Operation) – BGM On/Off
11-11-19 Service Code Setup (for Setup/
Entry Operation) – Key Touch
Tone On/Off
11-11-20 Service Code Setup (for Setup/
Entry Operation) – Change
Incoming CO and ICM Ring
Tones
2 - 660
Description/Comments
Set the service code for setting
call forwarding for Do Not Disturb.
Customize the answer message
waiting used for registration and
setup.
Cancel all messages waiting used
for registration and setup.
Cancel message waiting used for
registration and setup.
Customize the alarm clock used
for registration and setup.
Customize the display language
for multiline terminal used for
registration and setup.
Customize the text message
setting used for registration and
setup.
Customize the enable handsfree
incoming intercom calls used for
registration and setup.
Customize the force ringing of
incoming intercom calls used for
registration and setup.
Set the service code (default 751)
to assign 2-digit function codes to
the Function keys.
Customize the BGM On/Off used
for registration and setup.
Customize the key touch tone Off/
On used for registration and setup.
Customize the change incoming
CO and ICM ring tones used for
registration and setup.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 747)
MLT, SLT
(default = 0)
MLT, SLT
(default = 773)
MLT, SLT
(default = 771)
MLT, SLT
(default = 727)
MLT
(default = 678)
MLT
(default not assigned)
MLT
(default = 721)
MLT
(default = 723)
MLT
(default = 751)
MLT
(default = 725)
MLT
(default = 724)
MLT
(default = 720)
Flexible System Numbering
Level
2 3












