Qos Queue Statistics Accounting Configuration Commands; Display Qos Queue-Statistics Interface - H3C S9500 Series Command Manual

Command Manual – Packet Statistics Accounting
H3C S9500 Series Routing Switches
Note that:
If the objects to be monitored by the outbound packet statistics counter groups
configured on cards LSB1GV48DB0, LSB2GV48DB0, and LSB1GP48DB0
include ports, the statistics may not be accurate.
This command is not supported on non-Ethernet ports such as ATM
sub-interfaces on a WAN card. As for E1/T1 ports, outbound packet statistics
accounting is not supported either on ports or on VLANs.
This command is not supported on non-linear 10 GE cards such as LSB1XP4B0,
LSB1XP4CA0 and TGX1B, or on RPR logical ports on GE RPR cards.
This command is not supported on POS ports or RPR physical ports.
This command is mutually exclusive with the qos queue-statistics outbound
command.
Examples
# Configure counter group 0 in slot 4 to monitor the outbound packet statistics on
GigabitEthernet 4/1/1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] set egress counter0 slot 4 interface GigabitEthernet4/1/1
1.2 QoS Queue Statistics Accounting Configuration
Commands

1.2.1 display qos queue-statistics interface

Syntax
display qos queue-statistics [ inbound | outbound ] interface [ interface-type
interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
inbound: Displays QoS queue statistics in the bound direction of a port.
outbound: Displays QoS queue statistics in the outbound direction of a port.
interface-type interface-number: Specifies an interface by its type and number.
Currently, only Ethernet ports support this command.
Chapter 1 Packet Statistics Accounting Configuration
1-4
Commands