Display Ethernet Statistics - H3C S6812 Series Command Reference Manual

Overflow: More than 14 digits.
--: Not supported.
Table 2 Command output
Field
Interface
Usage (%)
Total (pkts/sec)
Broadcast (pkts/sec)
Multicast (pkts/sec)
Overflow: more than 14
decimal digits
--: not supported
Related commands
flow-interval
reset counters interface

display ethernet statistics

Use display ethernet statistics to display the Ethernet module statistics.
Syntax
display ethernet statistics slot slot-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID.
Examples
# Display the Ethernet module statistics for the specified slot.
<Sysname> display ethernet statistics slot 1
ETH receive packet statistics:
Totalnum
SNAPNum
LLCNum
ForwardNum
MPLS
Description
Abbreviated interface name.
Bandwidth usage (in percentage) of the interface for the last statistics polling
interval.
Average receiving or sending rate (in pps) for unicast packets for the last
statistics polling interval.
Average receiving or sending rate (in pps) for broadcast packets for the last
statistics polling interval.
Average receiving or sending rate (in pps) for multicast packets for the last
statistics polling interval. .
The command displays Overflow if the data length of a statistical item is
greater than 14 decimal digits.
The statistical item is not supported.
: 10447 ETHIINum
: 0 RAWNum
: 0 UnknownNum
: 4459 ARP
: 0 ISIS
6
: 4459
: 0
: 0
: 0
: 0