Display Fib Statistics - H3C S3610 Series Command Manual

Command Manual – IP Address and Performance
H3C S3610&S5510 Series Ethernet Switches
entries that match the natural network address and have the masks longer than or
equal to the natural mask will be displayed.
Description
Use the display fib ip-address command to display FIB items that match the specified
destination IP address. Each line in the export information stands for a FIB item.
Example
# Display the FIB items whose destination address match 10.1.0.0 in the range of
natural masks.
<Sysname> display fib 10.1.0.0 longer
Route Entry Count: 2
Flag:
U:Useable
R:Reject
Destination/Mask
10.0.0.0/8
10.1.1.1/32
For explanation about the information above, refer to Table 2-1.

2.1.3 display fib statistics

Syntax
display fib statistics
View
Any view
Parameter
None
Description
Use the display fib statistics command to display statistics about the FIB items.
Example
# Display statistics about the FIB items.
<Sysname> display fib statistics
Route Entry Count
G:Gateway H:Host
L:Generated by ARP or ESIS
Nexthop Flag TimeStamp
10.1.1.1 U
127.0.0.1 HU
: 2
2-4
Chapter 2 IP Performance Configuration Commands
B:Blackhole D:Dynamic
Interface
t[1141140133] Vlan1
t[1141140133] InLoop0
S:Static