Display Ethernet Statistics - H3C IE4300 Command Reference Manual

If you specify an interface type but do not specify an interface number, this command displays traffic
rate statistics for all up interfaces of the specified type.
If you specify an interface type and an interface, this command displays traffic rate statistics for the
specified interface.
If an interface that you specify is always down for the most recent statistics polling interval, the
system prompts that the interface does not support the command.
To set the statistics polling interval, use the
Examples
# Display the inbound traffic rate statistics for all interfaces.
<Sysname> display counters rate inbound interface
Usage: Bandwidth utilization in percentage
Interface
GE1/0/1
Overflow: More than 14 digits.
--: Not supported.
Table 2 Command output
Field
Interface
Usage (%)
Total (pps)
Broadcast (pps)
Multicast (pps)
Overflow: more than 14
decimal digits
--: not supported
Related commands
flow-interval
reset counters interface

display ethernet statistics

Use
display ethernet statistics
Syntax
display ethernet statistics slot slot-number
Views
Any view
Predefined user roles
network-admin
flow-interval
Usage (%) Total (pps)
0
Description
Abbreviated interface name.
Bandwidth usage (in percentage) of the interface for the last statistics polling
interval.
Average receiving or sending rate (in pps) for unicast packets for the last
statistics polling interval.
Average receiving or sending rate (in pps) for broadcast packets for the last
statistics polling interval.
Average receiving or sending rate (in pps) for multicast packets for the last
statistics polling interval. .
The command displays Overflow if the data length of a statistical item is
greater than 14 decimal digits.
The statistical item is not supported.
to display the Ethernet module statistics.
8
command.
Broadcast (pps)
0 --
Multicast (pps)
--