DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
8.
OAM
Cable Diagnostics
DDM
Cable Diagnostics
The cable diagnostics feature is designed primarily for administrators or customer service representatives to verify and
test copper cables; it can rapidly determine the quality of the cables and the types of error.
To view the following window, click OAM > Cable Diagnostics, as shown below:
The fields that can be configured are described below:
Parameter
From Port - To Port
Click the Test button to test the specific port.
Click the Clear button to clear all the information for the specific port.
Click the Clear All button to clear all the information in this table.
NOTE: Cable diagnostic function limitations. Cable length detection is only supported on GE ports.
NOTE: The maximum cable diagnosis length is 120 meters.
NOTE: The deviation of cable length detection is about 5 meters for GE ports.
Figure 8-1 Cable Diagnostics Window
Description
Select the appropriate port range used for the configuration here.
103