Table of Contents
Advertisement
4 Configuration
Storm Control Status
Storm Control
Threshold (8-1000000)
Click Apply to make the configurations take effect.
Security > Port Security
Port Security improves network security by restricting access on a specific port only to users with a specific
MAC address.
Ports can be locked to prevent users from modifying the MAC address forwarding table. Locking ports also
prevents additional MAC addresses from being learned.
The fields that can be configured for Port Security are described below:
Item
From Port / To Port
Admin State
Max Learning Address
Click Apply to make the configurations take effect.
OAM > Cable Diagnostics
The Cable Diagnostics is designed primarily for administrators and customer service representatives to
quickly examine the quality of copper cables, recognize the cable type, and detect cable errors.
Specify to enable or disable the storm control function.
Specify the type of controlled packets, Options are Broadcast
Only, Multicast & Broadcast, and Multicast & Broadcast &
Unknown Unicast.
If Storm Control is enabled, the Switch will start dropping
packets of the specified type when exceeding this threshold.
The threshold ranges from 8 to 1,000,000 kbps.
Table 4.31
Figure 4.48 – Security > Port Security
Description
Specify a range of ports to be configured.
Select Enable to lock down the port and the associated MAC
address table. Select Disable to disable Port Security on the
corresponding port(s).
Define the maximum number of MAC addresses that can be
associated with the corresponding port. This ranges from 0 to
4160.
Table 4.32
Figure 4.49 - OAM > Cable Diagnostics
3
3
7
7
D-Link Smart Managed Switch User Manual
Advertisement
Table of Contents
