xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Server IP Address
Client's MAC Address
Ports
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry based on the information entered.
Filter DHCPv6 Server
This window is used to configure the filter DHCPv6 server state.
To view this window, click Security > DHCP Server Screening > Filter DHCPv6 Server as shown below:
The fields that can be configured are described below:
Parameter
Trap State
Log State
Ports
State
Source IP Address
Click the Apply button to accept the changes made for each individual section.
Figure 8-69 DHCP Offer Permit Entry Settings window
Description
The IP address of the DHCP server to be permitted.
The MAC address of the DHCP client.
The port numbers of the filter DHCP server. Tick the All Ports check box to include
all the ports on this switch for this configuration.
Figure 8-70 Filter DHCPv6 Server window
Description
Click to enable or disable the filter DHCPv6 server trap state.
Click to enable or disable the filter DHCPv6 server log state.
Enter a range of ports to be configured. Tick the All Ports check box to include all
the ports on this switch for this configuration.
Select to enable or disable the filter DHCPv6 server state.
Enter the source IPv6 address to the filter DHCPv6 server forward list.
375