Ssl Certification Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click Apply to implement changes made.
NOTE: Certain implementations concerning the function and configuration of SSL are not available
on the web-based management of this Switch and need to be configured using the command line
interface.
NOTE: Enabling the SSL command will disable the web-based switch management. To log on to
the Switch again, the header of the URL must begin with https://. Entering anything else into the
address field of the web browser will result in an error and no authentication will be granted.

SSL Certification Settings

This window is used to display SSL certification settings
To view the following window, click Security > SSL > SSL Certification Settings:
The following parameter can be configured:
Parameter
SSL Cerficate File
Name
SSL CA Chain
Configuration
Click the Apply button to accept the changes made. Click Delete to remove the specified entry.
SSH
SSH is an abbreviation of Secure Shell, which is a program allowing secure remote login and secure network services over an
insecure network. It allows a secure login to remote host computers, a safe method of executing commands on a remote end node,
and will provide secure encrypted and authenticated communication between two non-trusted hosts. SSH, with its array of
Figure 6 - 40. SSL Certification Settings window
Description
Specify the SSL certificate file name.
Click the Default radio button to use the build-in certification on the Switch, or click the radio
button below to specify chain of certifications on the Switch.
159