Application Authentication Settings; Accounting Settings - D-Link DGS-3000 Series Reference Manual

Application Authentication Settings

Users can configure Switch configuration applications (Console, Telnet, SSH, HTTP) for login at the user level and at
the administration level (Enable Admin) utilizing a previously configured method list.
To view this window, click Security > Access Authentication Control > Application Authentication Settings as
shown below:
The fields that can be configured are described below:
Parameter
Application
Login Method List
Enable Method List
Click the Apply button to accept the changes made.

Accounting Settings

This window is used to configure the state of accounting services and levels to issue the commands.
To view this window, click Security > Access Authentication Control > Accounting Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-63 Application Authentication Settings window
Description
Lists the configuration applications on the Switch. The user may configure the Login
Method List and Enable Method List for authentication for users utilizing the Console
(Command Line Interface) application, the Telnet application, SSH, and the Web (HTTP)
application.
Using the drop-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Login Method Lists window, in this
section, for more information.
Using the drop-down menu, configure an application to promote user level to admin-level
users utilizing a previously configured method list. The user may use the default Method
List or other Method List configured by the user. See the Enable Method Lists window, in
this section, for more information
Figure 8-64 Accounting Settings window
257