Time Range Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Choose how the alerts are used from the drop-down menu. Select Log to send the alert of the
System Severity
Severity Type configured to the Switch's log for analysis. Choose Trap to send it to an SNMP
agent for analysis, or select All to send the chosen alert type to an SNMP agent and the
Switch's log for analysis.
This drop-down menu allows you to select the level of messages that will be sent. The options
Severity Level
are Emergency (0), Alert (1), Critical (2), Error (3), Warning (4), Notice (5), Information(6) and
Debug(7).
Click the Apply button to accept the changes made.

Time Range Settings

Time range is a time period that the respective function will take an effect on, such as ACL. For example, the
administrator can configure the time based ACL to allow users to surf the Internet on every Saturday and every
Sunday, meanwhile to deny users to surf the Internet on weekdays.
The user may enter up to 64 time range entries on the Switch.
To view the following window, click System Configuration > Time Range Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Enter a name of no more than 32 alphanumeric characters that will be used to identify this
Range Name
time range on the Switch. This range name will be used in the Access Profile table to identify
the access profile and associated rule to be enabled during this time range.
This parameter is used to set the time in the day that this time range is to be enabled using the
Hours
Figure 2-21 System Severity Settings window
Figure 2-22 Time Range Settings window
27