Ospf Neighbor Table; Ospf Virtual Neighbor; Dvmrp Monitoring - D-Link DES-3350SR User Manual

OSPF Neighbor Table

This table can be found in the OSPF Monitoring folder by clicking on the OSPF Neighbor Table link. Routers that are connected
to the same area or segment become neighbors in that area. Neighbors are elected via the Hello protocol. IP multicast is used to
send out Hello packets to other routers on the segment. Routers become neighbors when they see themselves listed in a Hello
packet sent by another router on the same segment. In this way, two-way communication is guaranteed to be possible between any
two neighbor routers. This table displays OSPF neighbors of the Switch.
To search for OSPF neighbors, enter an IP address and click Find. Valid OSPF neighbors will appear in the OSPF Neighbor Table
below.

OSPF Virtual Neighbor

This table can be found in the OSPF Monitoring folder by clicking on the OSPF Virtual Neighbor Table link. This table
displays a list of Virtual OSPF Neighbors of the Switch. The user may choose specifically search a virtual neighbor by using one
of the two search options at the top of the screen, which are:
Parameter

DVMRP Monitoring

This menu allows the DVMRP (Distance-Vector Multicast Routing Protocol) to be monitored for each IP interface defined on the
Switch. This folder, found in the Monitoring folder, offers 3 screens for monitoring; Browse DVMRP Routing Table, Browse
DVMRP Neighbor Address Table and Browse DVMRP Routing Next Hop Table. Information on DVMRP and its features in
relation to the DGS-3324SRi can be found in Section 6, under IP Multicast Routing Protocol.
D-Link DES-3350SR Standalone Layer 3 Switch
AS boundary router.
Displays the cost of the table entry.
Cost
Displays a sequence number corresponding to
Sequence
number of times the current link has been
advertised as changed.
Figure 10 - 28. OSPF Neighbor Table
Allows the entry of an OSPF Area ID −
Transit Area ID
previously defined on the Switch − that allows
a remote area to communicate with the
backbone (area 0). A Transit Area cannot be a
Stub Area or a Backbone Area.
The OSPF router ID for the remote router. This
Virtual Neighbor
IP address uniquely identifies the remote
Router ID
area's Area Border Router.
Figure 10 - 29.OSPF Virtual Neighbor Table
Description
148