Commands And Functional Groups - Supermicro SSH-C48Q User Manual

Commands and Functional Groups

The CLI commands are grouped into functional areas as shown in the
following table.
Type list -noprompt to display the list of command groups.
Table 1: Command Groups
Group
General General
General commands for user management and CLI
configuration.
Chassis Chassis
Chassis management commands, such as FRU info, fan/power
supply state, and others.
Network Network
Ethernet interface management commands.
Firmware Firmware
Commands that display or modify firmware revision levels.
Fm Fabric Management
Commands used for Subnet Manager (SM), Subnet
Administration (SA), Performance Manager (PM), and Fabric
Executive (FE) configuration and operation.
Log Log
Commands for viewing log files as well as configuring logging
parameters.
Ism Interconnect Switch Management (ISM)
Port configuration and statistics commands.
Tm Time Management
Commands for retrieving and setting the current system time,
setting the time zone, and setting daylight saving time
parameters.
Description
3
Introduction