27
Thresholds and event notification
12. Click OK on the Set Threshold Policies dialog box.
13. Make the threshold changes by selecting one of the following options:
14. Click OK on the Confirm Threshold Changes dialog box.
Duplicating a threshold policy
To duplicate a threshold policy, complete the following steps.
1. Select Monitor > Performance > Configure Thresholds.
2. Select the threshold policy you want to copy in the Available Threshold Policies table.
3. Click Duplicate.
4. Click OK on the Set Threshold Policies dialog box.
5. Make the threshold changes by selecting one of the following options:
6. Click OK on the Confirm Threshold Changes dialog box.
810
The threshold policy displays in the Available Threshold Policies table with a modified icon
(
). To assign a threshold policy to a fabric or device, refer to
page 811.
The Confirm Threshold Changes dialog box displays.
FIGURE 356
Confirm Threshold Changes dialog box
•
To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
•
To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
The Set Threshold Policies dialog box displays.
The threshold policy displays in the Available Threshold Policies table with an added icon (
using the following naming format copy of Threshold_Name. To edit the threshold, refer to
"Editing a threshold policy"
refer to
"Assigning a threshold policy"
The Confirm Threshold Changes dialog box displays.
•
To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
•
To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
on page 809. To assign a threshold policy to a fabric or device,
on page 811.
"Assigning a threshold policy"
Brocade Network Advisor SAN User Manual
53-1002167-01
on
)