Figure 22 Select Ports For Customizing The Switch Throughput Utilization Graph - Brocade Communications Systems SN3000B Administrator's Manual

8
Customizing basic monitoring graphs
You can perform the following in the dialog box:
110
The title of the dialog box varies, depending on the type of graph you are customizing, but the
layout of the dialog box is the same.
the Edit Switch Throughput Utilization graph.
FIGURE 22
Select Ports for customizing the Switch Throughput Utilization graph
a. Double-click the domain to expand the slot or port list.
NOTE
For the Brocade 8510-8, Brocade 8510-4, and Brocade DCX and Brocade DCX-4S
enterprise-class platforms, click the plus (+) signs to expand the ports under each slot, as
shown in Figure 22.
b. Click the port you want to monitor in the graph in the Port Selection List.
Use Shift+click and Ctrl+click to select multiple ports.
c. Click Add to move the selected ports to the Selected Ports list.
d. Optional: Click ADD ALL Ports to add all of the ports in the Port Selection List to the
Selected Ports list.
e. Optional: Click Search to open the Search Port Selection List dialog box, from which you
can search for all E_Ports, all F_Ports, or all port names with a defined string. Select the
ports you want to add and click Search in the Search Port Selection List dialog box.
Figure 22 displays an example of the setup dialog box for
Web Tools Adminstrator's Guide
53-1002152-01