Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 60

show interfaces
output definitions
Slot/Port
Operational Status
Last Time Link Changed
Number of Status Change
Type
MAC address
Bandwidth
Duplex
Autonegotiation
Long Accept
Runt Accept
Long Frame Size
Runt Size
Bytes Received
Rx Unicast Frames
Rx Broadcast Frames
Rx M-cast Frames
Rx Undersize Frames
Rx Oversize Frames
Rx Lost Frames
Rx Error Frames
Rx CRC Error Frames
Rx Alignments Err
Bytes Xmitted
Tx Unicast Frames
Tx Broadcast Frames
Tx M-cast Frames
Tx Undersize Frames
Tx Oversize Frames
Tx Lost Frames
Tx Collided Frames
Tx Error Frames
Release History
Release 7.1.1; command introduced.
page 1-24
Interface slot and port.
Interface status (up/down).
The last time the configuration for this interface was changed.
The total number of times that the configuration of this interface has
changed.
Interface type (Ethernet/Fast Ethernet/Gigabit Ethernet).
Interface MAC address.
Bandwidth (in megabits).
Duplex mode (Half/Full/Auto).
The auto negotiation settings for this interface.
Long Frames status (enable/disable).
Runt Frames status (enable/disable).
Long Frame Size (in Bytes).
Runt Frame Size (in Bytes).
Number of Bytes received.
Number of unicast frames received.
Number of broadcast frames received.
Number of multicast frames received.
Number of undersized frames received.
Number of oversized frames received.
Number of Lost Frames received.
Number of error frames received.
Number of CRC error frames received.
Number of Alignments Error frames received.
Number of Bytes transmitted.
Number of unicast frames transmitted.
Number of broadcast frames transmitted.
Number of multicast frames r transmitted.
Number of undersized frames transmitted.
Number of oversized frames transmitted.
Number of Lost Frames transmitted.
Number of collision frames received or transmitted.
Number of error frames transmitted.
Ethernet Port Commands
OmniSwitch CLI Reference Guide March 2011