Download Bootrom - Extreme Networks ExtremeWare XOS Command Reference Manual

download bootrom

download bootrom [[<ipaddress> | <hostname>] <filename> {{vr} <vrname>}
| memorycard <filename>] {msm <slotid>}
Description
Downloads a BootROM image after the Summit X450 switch or the BlackDiamond 10K switch has
booted. The downloaded image replaces the BootROM in the onboard FLASH memory.
Syntax Description
ipaddress
hostname
memorycard
vrname
filename
slotid
Default
N/A.
Usage Guidelines
NOTE
The Summit X450 switch does not support user-created VRs.
Upgrade the BootROM image only when asked to do so by an Extreme Networks technical
representative.
Prior to downloading the BootROM image on the switch, you must download the image you received
from Extreme Networks to a TFTP server on your network. On the BlackDiamond 10K switch, you can
also download the image to the external compact flash memory card.
Specify the or
ipaddress
the network.
ExtremeWare XOS 11.3 Command Reference
Specifies the IP address of the TFTP server.
Specifies the hostname of the TFTP server.
Specifies that the BootROM image should be obtained from the external
compact flash memory card.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
Specifies the name of the virtual router.
NOTE: The Summit X450 switch does not support user-created virtual routers
(VRs).
Specifies the name of the file that contains the BootROM image.
Specifies the MSM where the BootROM image should be downloaded.
• A specifies the MSM installed in slot A.
• B specifies the MSM installed in slot B.
NOTE: This parameter is available only on the BlackDiamond 10K switch.
parameters to download a BootROM image from a TFTP server on
hostname
download bootrom
1617