Debug Bootvar - Cisco MDS 9124 - Fabric Switch Reference

debug bootvar

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug bootvar
To enable debugging for boot variables, use the debug bootvar command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description all
errors
events
info
pss
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug bootvar all command is issued:
switch# debug
Related Commands Command
debug all
show boot
Cisco MDS 9000 Family Command Reference
6-6
debug bootvar {all | errors | events | info | pss}
no debug bootvar {all | errors | events | info | pss}
Modification
This command was introduced.
bootvar
all
Description
Enables debugging for all features on the switch.
Displays the boot variables or modules.
Enables all boot variable debug options.
Enables debugging for boot variable errors.
Enables debugging for boot variable events.
Enables debugging for boot variable information.
Enables debugging for boot variable PSS operations.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x