Debug Ips - Cisco MDS 9124 - Fabric Switch Reference

debug ips

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
vrrp
config
config-detail
error
flow
flow-detail
msgs
packet
show_all
upgrade
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.1(1)
3.0(1)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug ips show_all command is issued:
switch# debug ips show_all
IPS Manager:
iSCSI Trace Detail debugging is on
Related Commands Command
no debug all
show ips stats
show ips status
Cisco MDS 9000 Family Command Reference
6-66
Enables debugging of iSLB VRRP.
Enables debugging of the iSNS configuration.
Enables detailed debugging of the iSNS configuration.
Enables debugging of iSNS error conditions.
Enables debugging for the iSNS flow.
Enables detailed debugging for the iSNS flow.
Enables debugging of the iSNS messages received and responded.
Enables debugging of an iSNS packet.
Enables all debugging IPS manager flags.
Enables debugging for upgrade.
Modification
This command was introduced.
Added the iSLB and iSNS options.
Description
Disables all debugging.
Displays IP storage statistics.
Displays the IP storage status.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x