Duplicate-Message Throttle - Cisco MDS 9124 - Fabric Switch Reference

duplicate-message throttle

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
duplicate-message throttle
To enable throttling of duplicate Call Home alert messages, use the duplicate-message throttle
command in Call Home configuration submode. To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes Call Home configuration submode.
Command History Release
2.0(x)
Usage Guidelines
The rate of throttling is a maximum of thirty messages in 2 hours.
Examples
The following example shows how to enable throttling of duplicate Call Home alert messages.
switch# config terminal
switch(config)# callhome
switch(config-callhome)# duplicate-message throttle
Related Commands Command
callhome
callhome test
show callhome
Cisco MDS 9000 Family Command Reference
5-48
duplicate-message throttle
no duplicate-message throttle
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
Chapter 5 D Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x