Show Ip Sla Twamp Session - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

show ip sla twamp session

Use the show ip sla twamp session command in user EXEC mode to display Cisco IOS IP Service Level
Agreements (SLAs) Two-Way Active Measurement Protocol (TWAMP) test sessions.
Syntax Description source-ip ip-address
source-port
port-number
Defaults
Displays the IP SLAs TWAMP test sessions and results.
Command Modes User EXEC
Command History Release
12.2(52)SE
Usage Guidelines
Use the show ip sla twamp session command to display information about IP SLAs TWAMP test
sessions.
Examples The following is sample output from the show ip sla twamp session command:
Switch> show ip sla twamp session
Related Commands Command
show ip sla standards
show ip sla twamp
connection
requests}
OL-9645-10
show ip sla twamp session [source-ip ip address | source-port port-number]
(Optional) Display results from the TWAMP test session on the specified IP
address.
(Optional) Display results from the TWAMP test session on the specified
port.
Modification
This command was introduced.
IP SLAs Responder TWAMP is: Enabled
Recvr Addr: 172.27.117.116
Recvr Port: 3619
Sender Addr: 172.27.111.225
Sender Port: 32910
Session Id: 172.27.117.116:533112:9C41EC42
Connection Id: 95
Description
Displays the TWAMP server and reflector standards implemented on the
switch.
Displays IP SLAs TWAMP connections.
{detail |
Catalyst 3750 Metro Switch Command Reference
show ip sla twamp session
2-509