Show Ip Mroute Static; Show Ip Pim - Dell Networking 2024 Reference Manual

show ip mroute static

Use the show ip mroute static command in Privileged EXEC mode to display
all the static routes configured in the static mcast table if it is specified or
display the static route associated with the particular
Syntax
show ip mroute static [
sourceipaddr — IP address of source.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the static routes configured in the static
mcast table.
console#show ip mroute static
Source IP
--------------- --------------- --------------- ----------
1.1.1.1 255.255.255.0

show ip pim

The show ip pim command displays information about the interfaces
enabled for PIM.
Syntax
show ip pim
sourceipaddr
MULTICAST STATIC ROUTES
Source Mask RPF Address
2.2.2.2
]
Preference
23
Multicast Commands
sourceipaddr
.
1157