No User; Show Captive-Portal User - Dell Networking 2024 Reference Manual

Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#clear captive-portal users

no user

Use the no user command to delete a user from the local user database. If the
user has an existing session, it is disconnected.
Syntax
user-id
no user
user-id — User ID (Range: 1–128).
•
Default Configuration
There is no default configuration for this command.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#no user 1

show captive-portal user

Use the show captive-portal user command to display all configured users or a
specific user in the captive portal local user database.
1415
Captive Portal Commands