Table 150: Radius-Enabled Statistics; Enabling Statistics Collection With Radius - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

The <# env.setResult("secondary-input-stat-clacl", "matchAll") #> command
specifies that Service Manager track statistics associated with the classifier list named
matchAll, and that this classifier list is associated with the policy that is attached at
the secondary input stage.
The <# env.setResult("output-stat-clacl", "matchAll") #> command specifies
that Service Manager track the output statistics associated with the matchAll classifier
list, which is associated with the policy attached at the output stage.
NOTE: Before you reference as policy in the service definition macro to enable
Service Manager collect statistics, you must enable statistics collection for this policy
using the statistics enabled keyword in the command used for policy attachment
in the profile.
This example shows how you can also configure your service definition to collect
Example 2
total statistics from multiple classifier lists. The following command specifies that
three classifier lists are used to generate output statistics for a service created by the
service definition. Each time statistics are reported for this service, Service Manager
uses the total of the statistics for clacl1, clacl2, and clacl3.

Enabling Statistics Collection with RADIUS

You use the Service-Statistics RADIUS VSA [26-69] with either the RADIUS login or
CoA-Request method to enable statistics for RADIUS-activated service sessions. To
enable statistics, configure the Service-Statistics VSA with a value of either 1
(timestamp only) or 2 (volume and timestamp).
Table 150 on page 681 describes a partial RADIUS message in which the
Service-Statistics attribute has a value of 2 this enables volume and timestamp
statistics for the tiered service assigned to subscriber client1@isp1.com.

Table 150: RADIUS-Enabled Statistics

ip policy secondary-input <# name #> statistics enabled merge
ip policy output <# oname #> statistics enabled merge
qos-profile triplePlayIP
qos-parameter maxSubscBW <# outputBW; '\n' #>
<# env.setResult("activate-profile", name) #> <#
env.setResult("secondary-input-stat-clacl", "matchAll") #> <#
env.setResult("output-stat-clacl", "matchAll") #>
<# endtmpl #>
<# env.setResult("output-stat-clacl", "clacl1 clacl2 clacl3" ) #>
RADIUS Attribute
username
activate-service
Chapter 27: Configuring Service Manager
Tag Value
none client1@isp1.com
6 tiered(1280000, 5120000)
Configuring Service Manager Statistics
681