Monitoring Routing Table Address Lookup; Monitoring The Aaa Model; Monitoring Ip Addresses Of Primary And Secondary Dns And Wins Name Servers - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual
For e series broadband services routers - broadband access configuration
Hide thumbs
Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
- Configuration manual (712 pages)
Table of Contents
Advertisement
JUNOSe 11.0.x Broadband Access Configuration Guide
host1#show aaa domain-map
Domain: tunnel.com; router-name: default; ipv6-router-name: default;
tunnel-subscriber authentication: enable
Authentication is enabled.
Meaning
Related Topics
Monitoring Routing Table Address Lookup
Display whether the routing table address lookup or duplicate address check is
Purpose
enabled or disabled.
To display whether the routing table address lookup or duplicate address check is
Action
enabled or disabled:
host1#show aaa duplicate-address-check
enabled
Related Topics
Monitoring the AAA Model
Display the AAA model.
Purpose
To display the AAA model:
Action
host1#show aaa model
aaa model: old model
Related Topics
Monitoring IP Addresses of Primary and Secondary DNS and WINS Name Servers
Display the IP addresses of the primary and secondary DNS and WINS name servers.
Purpose
To display the IP addresses of the primary and secondary DNS and WINS name
Action
servers:
host1#show aaa name-servers
Name Server Addresses (for PPP Clients):
118
Monitoring Routing Table Address Lookup
show aaa domain-map
show aaa duplicate-address-check
show aaa model
primary DNS Addr
secondary DNS Addr
primary NBNS (WINS) Addr
secondary NBNS (WINS) Addr
10.2.3.4
10.6.7.8
10.22.33.44
10.66.77.88
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 and is the answer not in the manual?