Monitoring Radius Snmp Traps - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
Table 29: show radius statistics Output Fields (continued)
Related Topics

Monitoring RADIUS SNMP Traps

Display the configuration of RADIUS SNMP traps.
Purpose
146
Monitoring RADIUS SNMP Traps
Field Name
Packets Dropped
Requests
Start Requests
Interim Requests
Stop Requests
Reject Requests
Responses
Start Responses
Interim Responses
Stop Responses
Reject Responses
show radius statistics
Field Description
Number of packets dropped either because they are
too short or the E Series router receives a response
for which there is no corresponding request. For
example, if the router sends a request and the request
times out, the router removes the request from the
list and sends a new request. If the server is slow and
sends a response to the first request after the router
removes the request, the packet is dropped.
Total number of accounting requests sent, which is
the combined total of Start Requests, Interim
Requests, Stop Requests, and Reject Requests
Number of accounting start requests sent; includes
Acct-On, Acct-Start, Acct-Link-State, and
Acct-Tunnel-Start requests
Number of interim accounting requests
Number of accounting stop requests sent; includes
Acct-Off, Acct-Stop, Acct-Link-Stop, and
Acct-Tunnel-Stop requests
Number of accounting reject requests sent; includes
Acct-Link-Reject and Acct-Tunnel-Reject requests
Number of accounting responses received from the
server
Number of accounting start responses received;
includes Acct-On, Acct-Start, Acct-Link-Start, and
Acct-Tunnel-Start responses
Number of interim accounting responses
Number of accounting stop responses received;
includes Acct-Off, Acct-Stop, Acct-Link-Stop, and
Acct-Tunnel-Stop responses
Number of accounting reject responses received;
includes Acct-Link-Reject and Acct-Tunnel-Reject
responses