Monitoring Src Client Connection Statistics - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
Table 30: show sscc info Output Fields (continued)
Related Topics

Monitoring SRC Client Connection Statistics

Display statistics about connection between the SRC client and SAE. The command
Purpose
output refers to the SRC client by its former name, SSC client.
150
Monitoring SRC Client Connection Statistics
Field Name
SSC Client Statistics
show sscc info
Field Description
Statistics about the connection between the SRC client and SAE
Policy Commands received Number of policy commands
received on the SRC client connection
Policy Commands(List) Number of Policy Commands with
subtype List
Policy Commands(Acct) Number of Policy Commands with
subtype Accounting
Bad Policy Cmds received Number of Policy Commands
received with bad policies
Error Policy Cmds received Number of Policy Commands
received with errors
Policy Reports sent Number of Policy Reports sent
Connection Open requests Number of connections the SRC
client has tried to open with a remote SAE
Connection Open completed Number of connections
successfully open to the SAE
Connection Closed sent Number of connections the SRC
client has closed
Connection Closed remotely Number of connections that
were closed by the remote SAE
Create Interfaces sent Number of create interface indications
sent to the SAE
Delete Interfaces sent Number of delete interface indications
sent to the SAE
Active IP Interfaces Current number of active IP interfaces
the SRC client is aware of
IP Interface Transitions Number of IP interface transitions
logged by the SRC client
Synchronizes received Number of synchronization requests
the SRC client received from the SAE
Synchronize Complete sent Number of synchronization
complete indications sent
Internal Errors Number of internal errors
Communication Errors Number of errors with lower-layer
communications (such as socket errors)