Configuring The Dhcpv6 Local Server - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

7.
Related Topics

Configuring the DHCPv6 Local Server

In addition to the embedded DHCP local server that is used for IP version 4 (IPv4)
address support, E Series routers include an embedded DHCPv6 local server. This
server enables the router to function as a server for the DHCP protocol for IP version
6 (IPv6). The DHCPv6 local server sends and receives packets via IPv6 and informs
IPv6 of the routing requirements of the router clients.
The DHCPv6 local server provides the following IPv6 address support:
circuit-identifier Specifies the circuit identifier of the interface on which
the DHCP client's request was received.
circuit-type Specifies the circuit type of the interface on which the DHCP
client's request was received.
mac-address Specifies the DHCP client's MAC address.
option82 Specifies the DHCP client's option 82 value.
virtual-router-name Specifies the DHCP local server's virtual router name.
host1(config)#ip dhcp-local auth include virtual-router-name
host1(config)#ip dhcp-local auth include circuit-type
host1(config)#ip dhcp-local auth include circuit-identifier
(Optional) Verify your authentication configuration.
host1(config)#show ip dhcp-local auth config
DHCP Local Server Authentication Configuration
User-Prefix
Domain
Password
Virtual Router
Circuit Type
Circuit ID
MAC Address
Option 82
ip dhcp-local auth domain command
ip dhcp-local auth include command
ip dhcp-local auth password command
ip dhcp-local auth user-prefix
service dhcp-local authenticate
Delegates IPv6 prefixes to client routers; each client can have one prefix; prefixes
and DNS information can be locally configured or derived from RADIUS via AAA.
Provides DNS server information to directly connected router clients.
Chapter 19: Configuring DHCP Local Server
: ERX4-Boston
: ISP1.com
: to4TooL8
: included
: included
: included
: excluded
: excluded
Configuring the DHCPv6 Local Server
483