Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 330

JUNOSe 11.0.x Broadband Access Configuration Guide
Table 55: Default PPP Mappings (continued)
290
PPP Terminate Reasons
PPP Terminate Reason
bundle fail local mrru mismatch
bundle fail local mru mismatch
bundle fail peer mrru mismatch
bundle fail reassembly location
bundle fail reassembly mismatch
bundle fail record network
bundle fail server location mismatch
bundle fail static link
failover during authentication
interface admin disable
interface down
interface no hardware
ip admin disable
ip inhibited by authentication
ip link down
ip max configure exceeded
ip no local ip address
ip no local ip address mask
ip no local primary dns address
ip no local primary nbns address
ip no local secondary dns address
ip no local secondary nbns address
ip no peer ip address
ip no peer ip address mask
ip no peer primary dns address
ip no peer primary nbns address
RADIUS Acct-Terminate-Cause
Code Description
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
6 admin reset
6 admin reset
2 lost carrier
8 port error
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request
10 nas request