Dns Primary And Secondary Nms Configuration - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide

DNS Primary and Secondary NMS Configuration

To configure the DNS primary and secondary name server addresses:
1.
2.
NOTE: The router uses name server addresses exclusively for PPP clients and not
for domain name server resolution.
aaa dns primary
aaa dns secondary
aaa ipv6-dns primary
52
Configuring Name Server Addresses
Specify the IP address of the DNS primary name server.
host1(config)#aaa dns primary 10.10.10.5
or, for IPv6,
host1(config)#aaa ipv6-dns primary 2001:db8::8001
Specify the IP address of the DNS secondary name server.
host1(config)#aaa dns secondary 10.10.10.6
or, for IPv6,
host1(config)#aaa ipv6-dns secondary 2001:db8::8002
Use to specify the IP address of the DNS primary name server.
Example
host1(config)#aaa dns primary 10.10.10.5
Use the no version to set the corresponding address to 0.0.0.0.
See aaa dns
Use to specify the IP address of the DNS secondary name server.
Example
host1(config)#aaa dns secondary 10.10.10.6
Use the no version to set the corresponding address to 0.0.0.0.
See aaa dns
Use to specify the IPv6 address of the DNS primary name server.
Example
host1(config)#aaa ipv6-dns primary 2001:db8::8001