Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 88

JUNOSe 11.0.x Broadband Access Configuration Guide
This example verifies that local authentication is configured on the router.
Example 2
host1#show aaa authentication ppp default
local none
This example uses the show configuration category aaa local-authentication
Example 3
command with the databases keyword to show the local user databases that are
configured on the router.
host1# show configuration category aaa local-authentication databases
! Configuration script being generated on TUE NOV 09 2004 12:50:18 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.1.0 (November 8, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE:
! The category displayed is: aaa local-authentication databases
!
hostname host1
aaa new-model
aaa local database default
aaa local database westfordLocal40
This example uses the local-authentication users keywords to show the configured
Example 4
users and their parameters. The password for username cksmith is displayed
unencrypted because the default setting of disabled or no for the service
password-encryption command is used for the example. Secrets are always displayed
encrypted.
host1# show configuration category aaa local-authentication users
! Configuration script being generated on THU NOV 11 2004 13:40:41 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.1.0 (November 10, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE:
! The category displayed is: aaa local-authentication users
!
hostname host1
aaa new-model
aaa local username cksmith database default
!
aaa local username btjones database westfordLocal40
!
aaa local username maryrdavis database westfordLocal40
48
Configuring Local Authentication Servers
host1(config)#aaa authentication ppp default local none
This script represents only a subset of the full system configuration.
This script represents only a subset of the full system configuration.
password yourPassword1
operational-virtual-router boston2
ip-address-pool addressPoolA
secret 5 }9s7-4N<WK2)2=)^!6~#
operational-virtual-router boston2
ip-address-pool addressPoolA
secret 5 E@A:nDXJJ<irb\`mF#[j
18:31)
All rights reserved.
21:15)
All rights reserved.