Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 486

JUNOSe 11.0.x Broadband Access Configuration Guide
Table 94: show l2tp dial-out Output Fields (continued)
446
Monitoring Chassis-wide Configuration for L2TP Dial-out
Field Name
Sessions in inhibited state
Sessions in post-inhibited state
Sessions in failed state
Dial-out target statistics
Targets active
Targets created
Targets removed
Targets in down state
Targets in inhibited state
Targets in in-service state
Triggers discarded
Dial-out session statistics
Sessions active
Sessions created
Sessions removed
Sessions reset
Triggers received
Triggers enqueued
Triggers discarded
Triggers forwarded
Triggers max enqueued
Authentication requests
No resources for authentication
Authentication grants
Authentication Denies
Dial-outs requested
Field Description
Sessions on the VR that are in the inhibited state
Sessions on the VR that are in the postInhibited state
Sessions on the VR that are in the failed state
Statistics at the route target level
Current active targets
All targets created
Targets deleted
Targets in the down state
Targets in the inhibited state
Targets in the inService state
Trigger packets discarded
Statistics at the session level
Currently active sessions
All sessions created
Sessions deleted
Sessions reset using the l2tp dial-out session reset
command
Triggers received for dial-out sessions
Triggers that have been put into the queue
Trigger packets discarded
Trigger packets forwarded
Maximum number of triggers that have been
enqueued simultaneously since the last router reset
Authentication requests received
Authentication requests not processed because of
insufficient resources
Authentication requests granted
Authentication requests denied
Outgoing calls requested for sessions