Table 124: Show Dhcp Server Output Fields; Monitoring Dhcpv6 Local Server Binding Information - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

E E 10.6.128.10
E E 10.6.128.11
Table 124 on page 567 lists the show dhcp server command output fields.
Meaning

Table 124: show dhcp server Output Fields

Related Topics

Monitoring DHCPv6 Local Server Binding Information

Display the mapping between one or more IPv6 addresses and the DHCP unique ID
Purpose
of the subscriber's computer.
To display the DHCP binding information for an IPv6 address:
Action
host1#show ipv6 dhcpv6-local binding 2001:db8:4::/48
-------------
2001:db8:4::/48 <LL 1/00A0DE113502>
0
0
Field Name Field Description
O Read-only value that displays the operational status of the server
A Read/write value that displays the administrative status of the server
E Enabled; indicates that the server is being actively used to supply IP addresses
to clients
D Draining; indicates that the server is not accepting any new requests for
addresses, but is maintaining the addresses that it has already assigned
X Disabled; means that the server is not accepting any new requests for
addresses and has no outstanding addresses
Address IP address of a DHCP server
Leases Number of IP address leases granted by the server
Offers Number of offers sent by the server
Requests Number of requests sent to the server
Acks Number of acknowledgments received from the server
Naks Number of negative acknowledgments received from the server
Declines Number of IP addresses rejected because they were already in use
Releases Number of IP addresses released back to the server
show dhcp server
Prefix Client DUID
-------------------
Chapter 22: Monitoring and Troubleshooting DHCP
0 0 0 0
0 0 0 0
Lease
-------- ------------------
infinite FastEthernet 3/6.1
Monitoring DHCPv6 Local Server Binding Information
0 0
0 0
Intf
567